Esoteric P-03 Bedienungsanleitung PDF herunterladen (Seite 17)

Digital output and selecting priority playback area

Select digital output according to connected terminals.

Note that incorrect selection will result in no sound

output.

Perform the operations described in the section “Using the P-03

for the first time” on the previous page before using the P-03 for

the first time or after the P-03 has been reset to factory defaults.

Turn the unit on.

Hold down the PLAY AREA button for 2 seconds or

more.

Release the button when “OUT>

***

” appears on the

display.

(“

***

” depends on the setting.)

The GUI indicator lights when the setup mode is engaged.

Use the SKIP button (.//) to select digital output.

The output changes with each press of the button. Select the

terminal to which the D/A converter is connected.

< Select DUAL when a dual AES device is connected to the unit

using XLR digital cables.

< ES-LINK is a proprietary Esoteric format enabling Super Audio

CD digital output. In order to output signals in ES-LINK

format, connect an Esoteric ES-LINK compliant D/A converter

(D-03 or D-01) to the two XLR terminals on the unit using XLR

digital cables, select the DUAL digital output, and play a

Super Audio CD.

To select a digital output, perform operations up to

Step . Then wait for 10 seconds until the display

returns to normal.

To select a Super Audio CD area, go to Step .

Gently press the PLAY AREA button.

“LAYER>SACD” or “LAYER>CD” appears on the display.

There are two types of Super Audio CDs, regular ones that

contain 2-channel stereo and multi-channel stereo and hybrid

discs (two-layer discs) that contain Super Audio CD and

regular CD data.

The setting described here allows you to determine which

layer will be first selected for playback (the priority playback

layer) with a hybrid Super Audio CD.

Press SKIP (.//) to change setting.

SACD (default setting):

This mode gives priority to the Super Audio CD layer. The

“2ch” setting of the “2ch/Multi ch” selection plays back the

2-channel layer while the “Multi ch” setting plays back the

multi-channel layer.

CD:

This mode gives priority to the CD layer.

Selecting a layer that is not on the disc results in playback of

the layer found on the disc.

A change of playback layer using the PLAY AREA button

when playback is stopped is overridden by the setting

selected using operations described here when a different

disc is loaded.

Gently press the PLAY AREA button (or leave the unit

idle for 10 seconds) to exit setup.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 31 32

Kommentare zu diesen Handbüchern

Keine Kommentare

Esoteric P-03 Bedienungsanleitung Seite 17

Kommentare zu diesen Handbüchern